Curtain

How to Sew a Curtain Using Pattern and Size

By  | 

How to Sew a Curtain panel is very straightforward. It does not take a lot of time and there are not a lot of materials. If you can use some of the more common fabrics that you have lying around the house you will be just fine.

To start with, cut the fabric to the desired size. Make sure the measurement is correct so you do not make any mistakes when you are stitching the panels together. If you are using a pattern for how to sew curtains then you will need to have a matching fabric width and length. For the first step of the process, you will want to set your pattern up so that you can see how the panels will look before you start sewing. If you are only using a regular fabric then you can just be cutting the fabric at the factory and match the width and length yourself as well.

How to Sew a Curtain Panel

A good way to start when learning how to sew a curtain is to get the curtain and side pieces lined up. This will give you a better idea of how to sew a curtain with a pattern. If you are using a natural fabrics curtain you may want to consider cutting the material into several smaller pieces. If you are using a heavy fabric like velvet, you may want to use a glue gun to hold the pieces together. The advantage of using a glue gun is that it does not heat up and often will not melt the lining fabric.

With the bottom edge of the fabric on the outside, gather the edges and press them lightly. Then take the bottom edge of the fabric and press this down as well. Remember to allow an opening for the bottom of your door and for the bottom edge of your valance.

After you have applied the lining to your curtains the next step is to sew the top edge to the bottom edges of the natural fabric. With a small ball of the lining, you will need to press the bottom edge down. Sew the rest of the way around the window. You will now have a nice pocket for your valance. If you do not want a pocket, you can cut out the remaining sections of the fabric and use pins to make bunting or gathered edges around the edges of your pocket.

How to Sew a Curtain With Lining

When you are done, turn your attention to the crown and corners of the window. Using a pin you can pin these areas to the outside of the curtains. Be careful that the pins you use are not too big so that they will not fray the edges of your windowsill. You can even use a safety pin to hold these areas in place while you stitch the rest of the curtain together.

One of the advantages of using patterns when you learn how to sew a curtain is that you can choose fabrics that are more durable. You might decide that your pocket and pleated curtains look beautiful, but if they are made from cheap fabrics they will be prone to damage from sunlight and water. You will also find that the darker the fabric the less work it will take to hem it. Many people opt for a heavier fabric for their curtains because they want them to last a long time. The fabrics that are considered to be heavy are usually cotton and silk.

A very important consideration to keep in mind when learning how to sew a curtain is the size of the window opening. If the pattern uses the standard curtain rod, it is best to get an extra long rod so that you can stitch the pattern to each end of the rod. If the pattern makes use of a standard rod it is always easiest to get two different sized rods so that you can stitch the pattern to both sides of the opening. If you have a curtain that has several different fabrics on it then it is a good idea to get a measuring tape and mark the positions of the different fabrics before you stitch the curtains so that you can be sure the pattern and the sizes are correct.

Leave a Reply

Your email address will not be published. Required fields are marked *